- ZZ shields: low friction and high speed, moderate dust protection, poor water protection.
- 2RS seals: best protection against dust and water, slightly higher friction.
- Open bearings: for oil lubrication or where an external seal protects the bearing.
The closure on a ball bearing decides how long the grease stays inside and how much dirt gets in. Choosing the wrong one is one of the most common causes of early bearing failure.
The options
| Closure | Contact | Friction | Speed | Dust | Water |
|---|---|---|---|---|---|
| Open | — | Lowest | Highest | None | None |
| ZZ (2Z) | Non-contact metal | Low | High | Good | Poor |
| 2RZ | Non-contact rubber | Low | High | Good | Fair |
| 2RS (2RS1) | Contact rubber | Higher | Lower | Very good | Very good |
When to use ZZ
Metal shields leave a tiny gap to the inner ring, so they add almost no friction. They suit electric motors, fans, power tools and indoor machinery where speed matters and there is little water.
When to use 2RS
Rubber contact seals press lightly on the inner ring and keep out water, slurry and fine dust. They are the right choice for wheels, bicycles, agricultural machinery, pumps and anything washed down. Expect a lower limiting speed — typically 60–70% of the ZZ version.
When to buy open bearings
Open bearings are used where the bearing is oil-lubricated (gearboxes), where an external seal protects it, or where the customer adds a special grease. Many skate and reel bearings are bought open or with removable seals so they can be cleaned.
Seal materials and temperature
Standard 2RS seals are nitrile rubber (NBR), good from about −30 to +110 °C. For higher temperatures or aggressive chemicals, FKM (Viton) seals are available on request; PTFE seals are used on some ceramic bearings.
Browse deep groove ball bearings in ZZ and 2RS versions, or tell us your environment and we will recommend the closure.
Frequently asked questions
Is 2RS better than ZZ?
2RS is better for protection against water and dust; ZZ is better for low friction and high speed. The best choice depends on the environment.
Can I remove a ZZ shield?
Metal shields can be removed with care for cleaning, but are usually damaged in the process. Rubber seals are easier to remove and refit.



